A green swimming pool can be a daunting and frustrating problem for any pool owner. It not only looks uninviting, but can also be a health hazard if left untreated. However, with some effort and the right approach, you can clean a green pool and get it back to its crystal-clear state. In this blog post, we will guide you through the process of treating a green swimming pool the right way and using products from Waterwell Pro pool chemicals and Bioguard Pool Chemicals.

Step one : Remove Debris

The first step in cleaning a green pool is to remove any debris such as leaves, twigs, and other materials that may have fallen into the water. You can do this by using a skimmer net or a leaf rake. It is important to remove as much debris as possible, as this can contribute to the growth of algae and other micro-organisms.

Step two : Test the water

The next step is to test the water to determine its chemical levels. You can use a pool water test kit for this purpose. The ideal levels for pH, chlorine, and alkalinity are:

• pH: 7.4 – 7.6
• Chlorine: 1 – 3 ppm
• Alkalinity: 80 – 120 ppm

If any of these levels are off, you will need to adjust them before proceeding with the cleaning process.

Step 3: Shock the Pool

Shocking the pool means adding a large amount of chlorine to the water to kill off any bacteria, algae, and other microorganisms. To do this, you will need to calculate the appropriate amount of shock for your pool size based on the instructions on the package. Wear protective gloves and eyewear and pour the shock granules around the edges of the pool. Run the pool pump for several hours to circulate the water and distribute the shock evenly.

*To get the most out of your chlorine, ensure that your pH and Total Alkalinity levels are in balance.

There are different methods of adding chlorine to your pool and each has its own benefits.

• It can be added directly through the weir while on the filter setting. This method is slow releasing and therefore reduces the risk of spiking your ph.
• For a faster acting method, the chlorine can be diluted in a bucket of water and then added through the weir on the bypass/circulate setting. Be careful when diluting chlorine in water not to inhale the fumes.

The best time to add chlorine to the pool is in the late afternoon, avoiding the harsh sun which can cause evaporation. Remember to run the filter for 3-4 hours to evenly distribute the chlorine throughout the pool. The amount of chlorine to add is dependent on the size of the pool. Common practice is 1 cup per day for a 50 000 litre pool.

Step 6: Retest the Water

After 24 hours, test the water again to ensure that the chemical levels are within the appropriate range. If they are not, adjust them as needed and continue running the filter until the levels are correct. There are many reasons why your pool might be green even after a shock treatment with chlorine, this is why it is important to re-test the water. It may be due to no or low chlorine, green algae, dissolved metals, or you might have or simply outside influences such as weather and temperature.

Step 7: Maintain the Pool

To prevent your pool from turning green again, it is important to maintain the proper chemical levels and keep the pool clean and free of debris. Skim the surface regularly to remove any leaves and other debris, and vacuum the pool as needed. Also, make sure to clean the pool filter regularly and backwash it as needed. We carry a range of products that you can form into a monthly maintenance kit or you can select one of the maintenance kits from our leading chemical brands. Offerings come with instructions and take the guesswork out of pool maintenance.

In conclusion, cleaning a green pool can be a time-consuming and challenging process, but by following these steps, you can get your pool back to its crystal-clear state. With proper maintenance and regular upkeep, you can keep your pool looking great and ready for swimming all season long.